# Antenna Handbook - Applications by Y.T. Lo

By Y.T. Lo

Quantity 1: Antenna basics and Mathematical thoughts opens with a dialogue of the basics and mathematical thoughts for any form of paintings with antennas, together with uncomplicated ideas, theorems, and formulation, and strategies. DLC: Antennas (Electronics)

Best electrical & electronic engineering books

Antenna Handbook - Applications

Quantity 1: Antenna basics and Mathematical concepts opens with a dialogue of the basics and mathematical ideas for any form of paintings with antennas, together with easy rules, theorems, and formulation, and methods. DLC: Antennas (Electronics)

Applied Optimal Control: Optimization, Estimation and Control

This best-selling textual content makes a speciality of the research and layout of complex dynamics structures. selection known as it “a high-level, concise booklet that can good be used as a reference by way of engineers, utilized mathematicians, and undergraduates. The layout is nice, the presentation transparent, the diagrams instructive, the examples and difficulties helpful…References and a multiple-choice exam are integrated.

Probability, Random Variables and Random Signal Principles (McGraw-Hill series in electrical engineering)

This very winning concise creation to chance idea for the junior-senior point direction in electric engineering bargains a cautious, logical association which stresses basics and contains over 800 pupil workouts and considerable sensible functions (discussions of noise figures and noise temperatures) for engineers to appreciate noise and random indications in platforms.

Additional resources for Antenna Handbook - Applications

Example text

7. Transitions are between the 20 and 80% levels. 12 are connected externally. The outputs of several gates can therefore share a common pull-down resistor to form a wired-OR connection. The open emitter outputs also provide flexibility for driving transmission lines, the use of which in most cases is mandatory for interconnecting this high-speed logic. A twisted pair interconnection can be driven using the complementary outputs (A þ B) and (A þ B) as a differential output. Such a line should be terminated in an ECL line receiver (10114).

24 shows the D and J-K flip-flops with their characteristic equations along with the T (or toggle) flip-flop and the S-R flip flop. Since bistable devices are asynchronous, fundamental-mode, sequential logic circuits, only one input is allowed to change at a time. This means that for proper operation for a basic latch, only one of the data inputs S or R for an S-R NOR latch (and the NAND implementation) may be changed at one time. , the data input(s) must be stable for a minimum period before the control input C changes the latch from the transparent mode to the memory mode.

25 33 10 10 20 10 20 a See text for explanation of abbreviations. Source: P. Graham, ‘‘Gates,’’ in Handbook of Modern Electronics and Electrical Engineering, C. , New York: WileyInterscience, 1986, p. 871. With permission. 5-V limit set for all other TTL families. Input leakage currents for 74LSxx are specified at Vi ¼ 10 V, and input voltage levels up to 15 V are allowed. The 74LSxx has the additional feature of the Schottky diode D1 in series with the 100-O output resistor. This allows the output to be pulled up to 10 V without causing a reverse breakdown of T5.